If you are going to install a supercharger or turbocharger on your vehicle; you need more fuel. Kenne Bell makes a reliable boost a pump that can be easily mounted in an out of sight location and once properly set may never need to be adjusted or fussed with again; just quietly working away in […]
Today this super clean 1985 Ford Mustang GT came to us for a baseline dyno run; just to see what kind of power it was making. Its a one owner car that has had several mods done over the years but still wears the original paint; except for the custom cowl induction hood. At just above […]
Last week we had a ’99 Cobra brought in that had a Vortech supercharger installed. There was a notable leak at the supercharger; and the car hadn’t been tuned properly. We sublet the rebuild off to Vortech; and upon its return we will be tuning the Cobra here on our dyno.
This Mustang came in to us with customer concerns of intermittent turn signals and an inoperative horn. After inspection and testing; we confirmed a faulty switch and wiring to blame. Replaced the switch and all is functioning well now.
In this week is a C5 Corvette getting ready to accept a brand new Magnuson supercharger. In the tear down phase as shown here; but looking forward to reassembly and making some respectable numbers soon.
This engine is a 460 swapped into an F-100 that the owner had some pretty serious valve train problems with. The engine would randomly toss the push rods out of the rocker arms. New correct length push rods and careful attention to the rockers geometry fixed this concern. Anytime anything in the engines upper end […]