Category: Repair and Maintenance
Supercharged Ford Mustang tune-up
We receieved a call from a customer who recently purchased a pre-owned Mustang and were experiening basic driveability issues. Some inspecting and testing led to a replacement of all 8 spark plugs, spark plug boots, and replacing the clogged fuel filter which was preventing full fuel flow at high RPM. The car performs much more responsively […]
Rear differential rebuild
Customer came in complaining of a howling rear end at low speeds that got worse as acceleration increased. The pinion seal had let go which caused two bearings to fail in the process. After a thorough teardown and inspection, all reused components were cleaned in our parts washer to ensure all metal shavings were gone and the […]
1975 Ford F250 carb rebuild
We had a customer that brought us this 4×4 Ford complaining of backfire and no power at full throttle. Recommended replacement of the fuel filter and a carb rebuild with bigger jets and now this truck hauls.
Diesel injector replacement.
We had this Ram brought in for complaints of hard starting. At 298,000; the Cummins engine had injectors that were starting to fail so all 6 were replaced.
VW head gasket
Replacing the head gasket on the GTI that was brought in for the no-start condition. Issues in the valve train prompted head removal and gasket replacement.
Ford big block starter misalignment/flywheel damage
This hot rod came to us for making an awful racket when starting. The starter had been installed wrong, causing the gear to crash into the flywheel and damage both the starter and flywheel. The flywheel is still usable; but the starter has been replaced and set up correctly – making sure no further damage […]